HTC Hydraulic Threaded - Body hydraulic clamp cylinder
Threaded-Body Hydraulic Cylinder – Screw-in Cylinder :
- Push type hydraulic cylinder with threaded body, screw-in cylinder
- These threaded cylinders are suitable for use in all types of clamping fixtures.
- The cylinders can be screwed directly into tapped holes in the fixture body up to the hexagon-section.
- space saving and easy installation at fixtures
- small dimensions, minimum spaces between the clamps when installed in a row
- oil supply through drilled oil channels in the fixture body.
- high clamping forcessingle acting with spring return
- Max. Operating pressure : 250 bar (kgf/cm2)
- Min. Operating pressure : 20 bar (kgf/cm2)
Note :
- Cylinders must not be loaded iin retracted position.
- Cylinders must not be used without workpiece
- Care for protection against direct influences of aggressive cutting lubricants and coolants
- supplied with leckage-proof sealing for bottom sealing of the cylinder
Ordering Indication : HTC-16 A
| SERIES | HTC | |
|---|---|---|
| Cylinder inside diamater | ø12, ø16, ø20, ø25 | |
| Piston rod type | A : round top type / spherical piston type B : threaded top type/rod with inner thread |
| Model No. | Push force bei 250 bar [kN] | Stroke [mm] | Cylinder capacity [cm3] | eff. piston area [cm2] | Weight [g] |
|---|---|---|---|---|---|
| HTC-12A | 2,2 | 10 | 2.14 | 1.77 | 70 |
| HTC-16A | 4,0 | 12 | 4.24 | 2.83 | 140 |
| HTC-20A | 6,2 | 15 | 7.29 | 4.15 | 220 |
| HTC-25A | 9,8 | 16 | 11.85 | 6.15 | 370 |
| HTC-12B | 2,2 | 10 | 2.14 | 1.77 | 80 |
| HTC-16B | 4,0 | 12 | 4.24 | 2.83 | 150 |
| HTC-20B | 6,2 | 15 | 7.29 | 4.15 | 240 |
| HTC-25B | 9,8 | 16 | 11.85 | 6.15 | 400 |
| Model | A | B | C | D | F | G | H | N | ST |
|---|---|---|---|---|---|---|---|---|---|
| HTC-12A | 38 | 36 | 7 | M22x1.5 | 12 | 16 | 6 | - | 10 |
| HTC-16A | 46.5 | 44.5 | 8 | M26x1.5 | 16 | 20 | 7 | - | 12 |
| HTC-20A | 57.5 | 51 | 8 | M30x1.5 | 20 | 24 | 7 | - | 15 |
| HTC-25A | 58.5 | 55 | 11 | M38x1.5 | 25 | 28 | 10 | - | 16 |
| HTC-12B | 45 | 36 | 7 | M22x1.5 | 12 | 16 | 6 | M6x1.0 | 10 |
| HTC-16B | 52 | 44.5 | 8 | M26x1.5 | 16 | 20 | 7 | M6x1.0 | 12 |
| HTC-20B | 64.5 | 51 | 8 | M30x.1,5 | 20 | 24 | 7 | M8x1.25 | 15 |
| HTC-25B | 67.5 | 55 | 11 | M30x1.5 | 25 | 28 | 10 | M8x1.25 | 16 |